A custom podcast mic flag for the Shure SM7B with a round opening, a foam-lined fit and a cable slot keep it snug on the mic and your XLR clear.
Your artwork is UV-printed directly on all five faces of a 3-inch cube. No stickers to peel, bubble or lift at the corners. Full colour, gradients and fine detail all print, so detailed cover art works as well as a simple wordmark.
Ready 10 days after payment and artwork.
Fits: Designed and fit-tested for Shure SM7B mics only.
Size: 76.2 mm (3") cube.
Printed faces: Five. The top is open, with a mic opening and a cable slot.
Fit: Snug, with a foam strip inside.
Material: 3D-printed PLA.
Important Notes:
Upload a square PNG, at least 1000 × 1000 px.
For a logo, use a transparent background, so the flag colour shows around it.
Cover art works too, upload and adjust per the margins accordingly.
Keep text clear of the edges and within the safe area stated.
A custom podcast mic flag for the Shure SM7B with a round opening, a foam-lined fit and a cable slot keep it snug on the mic and your XLR clear.
Your artwork is UV-printed directly on all five faces of a 3-inch cube. No stickers to peel, bubble or lift at the corners. Full colour, gradients and fine detail all print, so detailed cover art works as well as a simple wordmark.
Ready 10 days after payment and artwork.
Fits: Designed and fit-tested for Shure SM7B mics only.
Size: 76.2 mm (3") cube.
Printed faces: Five. The top is open, with a mic opening and a cable slot.
Fit: Snug, with a foam strip inside.
Material: 3D-printed PLA.
Important Notes:
Upload a square PNG, at least 1000 × 1000 px.
For a logo, use a transparent background, so the flag colour shows around it.
Cover art works too, upload and adjust per the margins accordingly.
Keep text clear of the edges and within the safe area stated.